Bathtub Replacement in Apex, NC
Bathtub replacement in Apex for cracked or worn fiberglass and acrylic tubs. Tell us about your bathroom and we connect you with a local contractor for a free estimate.
No cost and no obligation. Tell us about your project and a local contractor will reach out to talk it through.
Bathtub Replacement in Apex: what to know
Bathtub replacement in Apex is often driven by age rather than style. Fiberglass and acrylic tubs installed during the 1990s and 2000s building boom are reaching the point where finishes wear thin, bottoms flex and hairline cracks appear around the drain. A crack that lets water through can damage the subfloor long before it shows.
Replacing an alcove tub means removing the bottom of the wall finish to free the flange, pulling the old tub, checking the subfloor, and setting the new tub level on a proper bed. If the wall is a one-piece tub-shower unit, the whole unit has to come out, so the job becomes a new tub plus new walls.
In primary baths, Apex homeowners replacing a large garden tub often choose a smaller freestanding tub. That frees floor space but usually means new supply lines and a relocated drain.
What shapes a project in Apex
One-piece tub-shower units
If your tub and walls are a single fiberglass unit, replacing the tub means replacing the walls too. Plan for both.
Subfloor checks
Slow leaks around older tubs can soften the subfloor. Expect it to be inspected and repaired once the tub is out.
Permit questions
Direct replacements may not need a building permit under state law, but plumbing changes usually do. Confirm with the Town of Apex.
What the job involves
- Water off, drain and overflow disconnected
- Lower wall finish removed and the old tub taken out
- Subfloor checked for water damage
- New tub leveled and set, drain and overflow connected and tested
- Wall finish repaired, fixtures trimmed out and caulked
For a fuller walkthrough of each step, see our guide to bathtub replacement in Raleigh.
What affects the price
- Whether the tub is part of a one-piece unit with the walls
- Tub material, size and style
- How much wall tile or surround has to be redone
- Removing a heavy cast-iron or deck-mounted tub
- Changes to the drain or valve
The contractor you're matched with gives you a written estimate after seeing the room.
Bathtub Replacement in Apex: common questions
Can I replace just the tub if it's part of a one-piece unit?
No. A one-piece tub-shower comes out as a whole, so you'll replace it with a new tub and new wall surround or tile.
What's causing the flex in my Apex tub?
Often the support bed underneath has broken down or was never full. A replacement tub should be set on a proper mortar or foam bed.
Do I need a permit to replace a bathtub in Apex?
Possibly not for a like-for-like swap. Changes to the drain or valve generally need one from the Town of Apex.
Can I swap a garden tub for a freestanding one?
Yes. Plumbing usually changes to suit the new tub's filler and drain location.
Do you do the installation?
No. We connect you with an independent local contractor.
Bathtub Replacement in nearby cities
Ready to describe your project? Request a free estimate.
Planning bathtub replacement in Apex?
Tell us about the bathroom. We pass your project to a local contractor serving Apex who contacts you to arrange an estimate.
We are a referral service, not a contractor. Submitting a request is free and does not commit you to anything.